Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 32)

Run Batch - Runs the batch and opens the Current Batch tab, where you can monitor the
batch as it runs.
FIGURE 11. Create a New Multibatch
Use this button to add or remove pending batches to the multi-batch set up and to run a
multi-batch. A multi-batch is composed of one or more pending batches which, together, will
fit on one plate. Use the multi-batch feature to conserve plates.
NOTE: You cannot add a batch that forces multiple plates to a multi-batch
operation. When creating or adding batches, ensure your batches fit
on one plate.
xPONENT ® 3.1 Rev. 2 Software User Manual
22
For In Vitro Diagnostic Use