Luminex xPONENT 3.1 Rev 2 (IVD) - Manual (Page 56)

The commands for these routines display in the command list below the buttons.
Command - This list is used to view the name of the current command, its well location, its
status, and information about the command. Only the current commands appear in the box.
Reagents - Displays the reagents and well locations necessary for the selected routine. You
can select kits for the routines from the Calibration Kit and Performance Verification Kit
lists. In the lower right section of the Reagents area is a depiction of the Automated
Maintenance Plate. Place reagents in the wells of the Automated Maintenance Plate the way
they are placed in the depiction.
Report - Opens the Reports tab, with the Performance Verification Reports selection
displayed in the Report: list. See
Reports Tab .
Import Kit - Opens the Import Calibration or Performance Kit dialog box. Select a kit and
click Open to import it.
Run - Initiates the selected routine.
Lot Management Tab
Use this tab to manage calibration and verification kits.
FIGURE 31. Lot Management Tab
Active Reagents - Use this section to change calibration or performance verification kits, lot
numbers, and expiration dates, or to delete a kit.
• Calibration Kit - Select a calibration kit from this list. Details of the selected kit display in
the Lot Type, Active Lot Number, and Expiration Date fields.
xPONENT ® 3.1 Rev. 2 Software User Manual
46
For In Vitro Diagnostic Use