Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 147)

Micro-PWC CONFIGURATION GUIDE
Grafx Editor 127
selected. If the attribute has a text entry box, a blinking cursor will appear in that entry box and the desired
value, expression, or variable can be entered. If neither portion of the attribute setting box is clicked on, the
attribute will remain unaffected. If the attribute is selected but no entry is made in the entry box, the
attribute definition will use the attribute's default value.
Each attribute has a default value, and (except for the Text attribute, and some Blink and Spin attribute
parameters) a minimum and maximum permitted value. The default value is used when the attribute's
entry box has been clicked on but no entry is made, or when the value entered is outside the range of the
permitted values (less than the minimum or greater than the maximum). Default values for the attributes
are as follows.
✎ Note
It is possible to configure dynamic attributes which are unnecessary
for an object; configuration of such items will have no effect on the
object. For example, if the object is a straight line, and the Filled
attribute is configured, it will have no effect on the appearance of
the line.
Table 4-6. Attribute Default Values
ATTRIBUTE DEFAULT MINIMUM MAXIMUM
Text Empty string ("") none none
Visible 1 (visible) 0 1
Filled 1 (filled) 0 1
Fill Color 0 (black) 0 95
Line Color 0 (black) 0 95
Text Color 0 (black) 0 95
Line Style 1 (solid line) 0 4
Line Width 1 (narrow) 1 4
Pattern 1 (solid fill) 1 4
Blink Period 5 (tenths of a second) 1 none
Blink Phase 0 (Blink Periods) 0 none
Blink Color 1 1 (white) 0 95
Blink Duration 1 1 (Blink Periods) 1 none
Blink Color 2 0 (black) 0 95
Blink Duration 2 1 (Blink Periods) 1 none
Steady Color 7 (white) 0 95
Spin Period 5 (tenths of a second) 3 none
Spin Angle 20 (degrees) -180 +180