Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 53)

Micro-PWC CONFIGURATION GUIDE
System Configuration 33
From the System Window, select Menu > Configure > Network Parameters > Area Names to view the Area
Setup display, shown in
Figure 2-15 .
The Area Setup display is used to configure a 10-character name for each of the 255 process Areas. To do
so, click the text entry box and enter up to 10 characters.
These names are used network-wide for user reference; it is recommended that they be unique.
2.8.2 Event Bit Configuration
Event bits are a set of 4,096 group-wide event flags which can be set to indicate that an event has
occurred. Event bits are set (to 1) and reset (to 0).
Using Event Bit configuration, a name can be assigned to each event bit. Such a name can be mnemonic
and descriptive of the function of the event bit. Other features, such as the Historical Database, can then
be configured to reference the Event Bit by name.
TC00159A
Figure 2-15. Area Setup Display