Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 59)

Micro-PWC CONFIGURATION GUIDE
System Configuration 39
2.8.3.1.9 Default Device Characteristics
Default Device Characteristics are listed in Table 2-3 .
To return all parameters to default settings, click Default.
2.8.3.2 Changing Device Characteristics
If a device has already been configured, the characteristics of the existing device can also be changed via
the Printer Assignment display. To do so, click on the desired device on the list of devices to select it, then
click Edit. This action will cause the Device Characteristics display for that device to appear. Device Char-
acteristics can then be changed as described in
Section 2.8.3.1, Adding a Device .
2.8.3.3 Device Sort
The list of configured devices can be sorted by Device Name or by Node Name. Sorting by Device Name
places the devices in alphanumeric order according to name, regardless of the node to which they are
attached. Sorting by Node Name sorts the devices primarily by node and then by device name.
To sort the list of devices, click Sort. The Sort Criteria window will appear, as shown in Figure 2-19 .
Two options appear in the Sort Options window:
• Device Name
• Node Name, Device Name
Table 2-3. Default Device Characteristics
Characteristic Default
Device Name The entry box is empty.
Backup Device (None)
Node Name Defaults to the name of the local node.
Type File
Port Number Button face is blank by default when the Type char-
acteristic is set to “File”; otherwise it defaults to 1.
File Size 50
Use ETX/ACK Button face is blank initially; defaults to Yes when the
Type characteristic is set to Line Printer.
Emulation Epson
TC00163A
Figure 2-19. Sort Criteria Window