Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 32)

Micro-PWC CONFIGURATION GUIDE
12 System Configuration
2.3.2 Edit an Archival Group
To make changes to an existing Archival Group, click on the desired Archival Group name in the list box,
then click Edit. The Archival Group Scheduling window (
Figure 2-3 ) will be displayed.
This window allows the following parameters to be changed:
• Group Name
• Period and Start Time
• Area
2.3.2.1 Group Name
In the Group Name entry box, enter the name which is to identify the Archival Group. This name can be up
to 15 characters in length.
2.3.2.2 Period and Start Time
The Period and Start Time allow for the scheduling of the data archive for the Archival Group. Both the
cyclic Archival Period (user-defined archive interval) and the Start Time (which defines the beginning of the
Period) are entered in the same entry box.
The Period is entered first. The words Daily, Weekly, and Monthly are valid entries to define the period.
Also, you can define a customized period by defining the number of days, hours, minutes, and seconds in
the period using the following format:
DD:HH:MM:SS
Enter a comma (,) after the Period to separate it from the Start Time. After the Period has been defined, the
Start Time (hours, minutes, seconds) and date (day, month, year) which marks the beginning of the inter-
val, are entered in the following format:
HH:MM:SS DD-MMM-YY
The default period is daily (1:0:0:0) and the default Start Time is midnight of the current day (e.g., 00:00:00
30-May-05). Note that the 24 hour clock is used, and the month is identified by the first three letters of the
month name
(in English) .
An acknowledgable message will be broadcast at the scheduled time indicating that the Archival Group is
ready to be archived. This message is not repeated until the next scheduled data archive time for that
group.
2.3.2.3 Area
Each Archival Group can be associated with a specific plant Area. The Area assignment is used to route
the message (that the Archival Group is ready to be archived) to the devices (files, printers) which have
TC00904A
Figure 2-3. Archival Group Scheduling Window