Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 305)

Micro-PWC CONFIGURATION GUIDE
Utilities 285
9.9.3 Configuring Quick Keys 33 Through 64
The basic Quick Key keypad contains a minimum of 32 buttons by default. Once all 32 buttons have been
assigned, an additional 32 buttons can be configured, one at a time, for a total of 64 Quick Keys. When
Quick Keys which will appear outside the current Quick Key window (e.g., Quick Key 33) are configured,
scroll bars appear on the Quick Key window. Use the scroll bars to view the newly created Quick Keys.
After the Quick Key window has been closed, then reopened, all configured Quick Keys will be included in
the display. The size and shape of the Quick Keys window can be changed using the resize handles on the
window frame.
If more than 32 Quick Keys have been configured, and any of them have been cleared, no new Quick Keys
will be created until assignments for all the existing ones have been configured. For example, if 40 Quick
Keys are assigned, then Quick Keys 25 through 30 are cleared, all 40 will remain on display, but new
assignments must be configured for Quick Keys 25 through 30 before Quick Key 41 becomes available.
9.9.4 Clearing Quick Key Assignments
Once a Quick Key has been assigned to a display, it cannot be reassigned to a different display until it has
been cleared. To clear a Quick Key, click Clear, then click the Quick Key which is to be cleared. The
cleared Quick Key will then be available for assignment to a different display. To exit Clear mode without
clearing a Quick Key, click Clear again; the Quick Keys keypad will remain on display, allowing the user to
use or make further changes to the Quick Keys.
9.10 Summary - Quick Keys
Quick Keys The Quick Keys option offers each user a personalized set of 32 to 64 keys,
each of which can be assigned to call up a different display in the active
Operator Window. This saves time and keystrokes, and is ideal for accessing
frequently-viewed displays.
Close Use the Close button to remove the keypad display from view.
Clear Use the Clear button to clear Quick Key assignments. To do so, first click
Clear. The pointer changes shape. Next, click the Quick Key to be cleared.
The previous display assigned to the key will be cleared, and the key is then
available for re-assignment.
Help The Help icon on the Quick Keys keypad provides a description of the Quick
Keys feature.
Set The Set button is used to make unused Quick Keys available for assignment.
To do so, click Set. Quick keys which have already been assigned are
unavailable, and are stippled out. Click the desired Quick Key, then enter a
label, if desired, in the resulting window. Click OK or press
R ETURN to complete
the operation. The chosen Quick Key is then assigned to call up the display
currently in the Operator Window.