Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 182)

Micro-PWC CONFIGURATION GUIDE
162 Grafx Editor
Variables
Figure 4-38. Model Pop-up Pushbutton Configuration Window
button_label Enter the label to be displayed on the button.
Default: None
face_color Enter the number of the desired face color of the button. (See any color pal-
ette in the Settings or Properties windows for color numbers.)
Default: 26 (NOTE: Also used for FP_DYctrlpb.)
low_color Enter the number of the desired lower edge color of the button.
Default: 29 (NOTE: Also used for FP_DYctrlpb.)
model Enter the name of the model that will appear in the pop-up window when the
button is "pressed". (The model name should be that of an installed (on-line)
graphic or submodel.)
(User must define variable.)
scroll_flag Enter a 1 if a narrow pop-up window is desired; Enter a 0 if a wide pop-up win-
dow is desired.
Default: 0