Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 262)

Micro-PWC CONFIGURATION GUIDE
242 Logs
6.3.4.2 The Scheduled Time Parameter
The period (user-defined interval) at which the Event Log will be printed and the starting time of that period
appear on the face of the button labelled Scheduled Time. To configure these parameters, click on this but-
ton. A pop-up window (
Figure 6-4 ) will appear.
The period is defined first; the words DAILY, WEEKLY, and MONTHLY are valid entries to define the
period. Alternatively, you can define a customized period by defining the number of days, hours, minutes,
and seconds in the period using the following format:
DD:HH:MM:SS
The period must be followed by a comma. After the period has been defined, the starting time
(hours/minutes/seconds and day/month/year) is entered in the following format:
HH:MM:SS DD-MMM-YY
The default period is one hour (0:1:0:0), and the default starting time is midnight of the current day
(e.g., 00:00:00 19-APR-06).
6.3.4.3 The Event Bit Name Parameter
If the Log is to be triggered by an Event Bit, click on the text entry box labelled Event Bit Name to gain
focus, then enter the number or name of the Event Bit to be used to trigger the log.
6.3.4.4 The Device Parameter
A button labelled Device is located below the Event Bit Name entry box. If a device has been selected, the
device name will appear to the right of the Device button. If no device has been selected, the space to the
right of the Device button will be empty. (A device can be a printer or a file; see
Printer Assignment (Sec-
tion 2.8.3) for information on how to configure print devices.) To select or change the Printer Device, click
this button. The Printer Selection window ( Figure 6-5 ) will be displayed.
Figure 6-4. Event Log Scheduling Window
✎ Note The 24 hour clock is used, and the month is identified by the first
three letters of the month name
(in English) .