Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 72)

Micro-PWC CONFIGURATION GUIDE
52 System Configuration
Selecting Default Login from the Security menu displays the Default Login Configuration window
(
Figure 2-28 ).
2.10.2.1 Default Login Access Level
At the top of the Default Login Configuration window is a button which displays the current Access Level on
the button face. Access Levels are assigned to both login accounts (including the Default Login account)
and functions. To access a function, the Access Level of a user’s login account must be equal to or higher
than the Access Level assigned to the function. Function Access Levels are configured using the Function
Access option on the Security menu (see
Section 2.10.3, Function Access ). User login accounts are
assigned an Access Level using User Login Configuration (refer to Section 2.10.5, User Login ).
To change the Access Level of the Default Login account, click the button labelled Access Level. The
Access Level Selection window (
Figure 2-29 ) will appear on the screen.
TC00570A
Figure 2-28. Default Login Configuration Window
TC00167A
Figure 2-29. Access Level Selection Window