Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide User Manual
Page 202
Micro-PWC CONFIGURATION GUIDE
182 Grafx Editor
Variables
TagAtom
Enter the tag.atom of the controller database point that is to be toggled between 1
and 0.
(User must define variable.)
face_color
Enter the number of the desired face color of the button. (See any color palette in
the Settings or Properties windows for color numbers.)
Default: 26 (used for FP_DYctrlpb)
low_color
Enter the number of the desired lower edge color of the button.
Default: 29 (used for FP_DYctrlpb)
off_color
Enter the number of the desired color of the button label when the controller data-
base point configured in TagAtom is not equal to the value configured in on_value.
Default: 0 (Black)
off_label
Enter the desired text to appear on the button face when the controller database
point configured in TagAtom is not equal to the value configured in on_value.
Default: None.
on_color
Enter the number of the desired color of the button label when the controller data-
base point configured in TagAtom is equal to the value configured in on_value.
Default: 0 (Black)
on_label
Enter the desired text to appear on the button face when the controller database
point configured in TagAtom is equal to the value configured in on_value.
Default: None.
on_value
Enter the value of the controller database point configured in the variable TagAtom
that will change the button label to the text defined in the variable on_label.
Default: 0
up_color
Enter the number of the desired upper edge color of the button label.
Default: 23 (used for FP_DYctrlpb)