Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 41)

Micro-PWC CONFIGURATION GUIDE
System Configuration 21
2.6.1.1 System Title
The first item which appears in the Alarm Setup window is System Title. Enter a text string of up to 32 char-
acters which is to be used as the System Title. The System Title appears in the title bar of the Mini-Alarm
Window.
2.6.1.2 Top Alarm Line Presentation
The top two lines of the Mini-Alarm Window are used to display messages regarding process conditions
which are in alarm. The top alarm line can be configured to display either the newest or oldest alarm which
has the highest priority. (Priority 1 is the highest priority; Priority 16 is the lowest.) Furthermore, this may be
configured to behave differently, depending on whether unacknowledged alarms exist, or if all alarms have
been acknowledged. By default, the system will display the Newest High Priority alarm, whether or not
unacknowledged alarms exist.
In the portion of the window labelled Top Alarm Line Presentation are two pairs of radio buttons; the first
pair is labelled With All Alarms Acknowledged. To configure the Alarm Presentation in the top alarm line
with all alarms acknowledged, click on the appropriate radio button:
• Newest high priority
• Oldest high priority
For the change to take effect, the Mini-Alarm Window must be reopened; to do this, restart the Micro-
PWC’s computer, as described in the Micro-PWC installation and Setup Guide supplied with your system.
To configure the alarm presentation when unacknowledged alarms exist, perfomr the same operations
using the pair of radio buttons labelled With Unacknowledged Alarms.
T
Figure 2-9. Alarm Setup Window
✎ Note Changes to these parameters take effect when the Micro-PWC is
restarted.