1 add a user login, 1 user name, Figure 2-32. user login window – Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide User Manual
Page 78
Micro-PWC CONFIGURATION GUIDE
58 System Configuration
2.10.5.1 Add a User Login
To create a user login, click Add. The User Login window (
) will be displayed.
The top portion of the User Login window contains several text entry boxes and push buttons.
2.10.5.1.1 User Name
The entry box in the top left corner is labelled Username. Enter the name (to a maximum of 20 characters)
for the new user. The Username can be the name of a person (Cheryl, Clifford, Bob, etc.), or it can be a
descriptive term such as Operator, Supervisor, Sr_Engineer, and so on. User names can be entered in
either upper or lower case, depending on the user's preference. User names cannot contain spaces.
TC00571A
Figure 2-32. User Login Window
✎ Notes
1.
Remember that the Micro-PWC is case sensitive, and
the manner in which the user name is configured is the
way it must be entered each time the user logs in. It
may be more convenient to use all upper or all lower
case characters, rather than a mixture of the two.
2.
While the Micro-PWC software is case sensitive, the
Windows software is not. To avoid confusion when the
auto-login feature (described in
in this Configuration Guide) runs, do not
configure multiple Micro-PWC user login names that
differ only in the case of the letters used.