Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 261)

Micro-PWC CONFIGURATION GUIDE
Logs 241
Click Yes to delete the event log, or click No to exit the operation without deleting the log.
6.3.4 Schedule Event Logs
Event Logs can be scheduled to print on a regular basis. Click the log to be scheduled to select it, then
click Schedule at the bottom of the Log Configuration window (
Figure 6-1 ). The Log Scheduler window
( Figure 6-3 ) will appear.
6.3.4.1 Schedule Button
The first item in the Log Scheduler window is a toggle button labelled Schedule By. Click this button to tog-
gle between the available choices, which are:
• Not Scheduled
• Time
• Event
• Time and Event
The currently selected state appears on the face of the button. If Time is selected, the Event Log will print
at the scheduled time. If Event is selected, the Event Log will print when the specified Event Bit (if any) is
set. If Time and Event is selected, the log will print at both the specified time and whenever the specified
Event Bit is set. If Not Scheduled is selected, the other scheduling parameters can be configured, but the
log will not be printed.
TC00209A
Figure 6-3. Event Log Scheduler Window
✎ Note
Printers used to print scheduled logs must support PostScript.