Micromod Micro-PWC: 53PW6000 MicroPWC Configuration Guide - Manual (Page 197)

Micro-PWC CONFIGURATION GUIDE
Grafx Editor 177
on_color Enter the number of the desired color of the button label when the controller
database point configured in statatom is equal to the value configured in
on_value.
Default: 0 (Black)
on_value Enter the value of the controller database point configured in the variable
statatom that will cause an asterisk to be displayed on the button face and
cause the button label to be displayed in the color configured in on_color.
Default: 0
put_tagatom Enter the Tag.atom of the controller database point to which the data
configured in put_value will be written (e.g., tcPID.AUT).
Default: None
put_tagatom2 Enter the Tag.atom of the controller database point to which the data
configured in put_value2 will be written.
Default: None
put_tagatom3 Enter the Tag.atom of the controller database point to which the data
configured in put_value3 will be written.
Default: None
put_tagatom4 Enter the Tag.atom of the controller database point to which the data
configured in put_value4 will be written.
Default: None
put_value Enter the value that will be written to the controller database point configured
in put_tagatom (e.g., 1).
Default: None
put_value2 Enter the value that will be written to the controller database point configured
in put_tagatom2.
Default : None
put_value3 Enter the value that will be written to the controller database point configured
in put_tagatom3.
Default: None
put_value4 Enter the value that will be written to the controller database point configured
in put_tagatom4.
Default: None
statatom Enter the Tag.atom of the controller database point that is sets the status
"light" on when its value is equal to on_value (e.g., tcPID.AUT).
Default: None
up_color Enter the number of the desired upper edge color of the button label.
Default: 23 (used for FP_DYctrlpb)