Agilent Technologies L4400 - Manual (Page 17)

Introduction to the L4400 Series LXI Instruments 1
L4400 User’s Guide 5
Bench-Top Operation and Instrument Rack Mounting
The L4400 series instruments can be located on a bench- top or rack
mounted in standard 19- inch EIA rack cabinets.
Bench-Top Operation
Cooling and ventilation of the L4400 series instruments are through the
sides of the instrument chassis. When placed on the bench- top, ensure
the sides of the instrument are not directly covered or blocked.
Rack Mounting
The L4400 instruments are mounted in EIA rack cabinets using the
Y1160A rack mount kit. The kit allows you to mount one or two L4400
instruments side- by- side on a sliding shelf, while occupying one EIA rack
unit of space.
Rackmounting instructions are provided with the kit and are also
provided here.
Rack Mounting Kit Contents
The contents of the Y1160A sliding shelf rack mount kit are listed in
Table 1- 2.
Table 1-2. L4400 (Y1160A) Rack Mount Kit Contents.
Item Description Part Number Quantity
1 M4x8 flat head screw 1515-1367 12
2 10-32 pan head dress screw 0570-1577 4
3 10-32 x 0.625 pan head screw 2680-0105 10
4 10-32 x 0.5 flat head screw 2510-0283 2
5 10-32 clip-on nut 0590-0804 12
6 10-32 nut w/lock washer 2740-0003 4
7 Sliding shelf 5180-0102 1
8 Shelf rails 5180-0103 2
9 Filler panels 5180-0104 2
10 Rear (rail) brackets 5180-0105 2
--- Installation Instructions Y1160-90030 1