Agilent Technologies L4400 - Manual (Page 36)

24 L4400 User’s Guide
2 Software Installation and Configuration
Clicking on “Find Instruments” (Figure 2- 8) opens the search window.
Clicking on “Find Now” performs the search for instruments on the LAN
network. Instruments found (discovered) on the network (local subnet) are
indicated as shown. In the Figure 2- 8 example, two instruments were
located on the router subnet.
Figure 2-8. L4400 Instrument Private LAN Connection.
The “Find Instrument” function of Agilent Connection Expert is
supported only on computers that have a single LAN card installed. If
your computer has more than one LAN card, the L4400 instruments
must be entered “manually” using the IP addresses.
Adding and Configuring the Instruments
To add an instrument to the network configuration, select (highlight) the
instrument host name/IP address and click on ‘OK’ in the “Search for
Instruments on the LAN” window. This opens the “LAN Instrument” win-
dow shown in Figure 2- 9.
N O T E