Agilent Technologies L4400 - Manual (Page 68)

56 L4400 User’s Guide
3 Operating and Programming
Table 3-3. L4400 Series SCPI Command Summary.
Subsystem Commands
STATus *CLS
*ESE <enable_value>
*ESE?
*ESR?
*SRE <enable_value>
*SRE?
*STB?
STATus:MODule:ENABle <enable_value>
STATus:MODule:ENABle?
STATus:MODule:EVENt?
STATus:MODule:SLOT1:CONDition?
STATus:MODule:SLOT1:ENABle <enable_value>
STATus:MODule:SLOT1:ENABle?
STATus:MODule:SLOT1:EVENt]?
STATus:OPERation:CONDition?
STATus:OPERation:ENABle <enable_value>
STATus:OPERation:ENABle?
STATus:OPERation[:EVENt]?
STATus:PRESet
STATus:QUEStionable:CONDition?
STATus:QUEStionable:ENABle <enable_value>
STATus:QUEStionable:ENABle?
STATus:QUEStionable[:EVENt]?
SYSTem:MODule?
MEMory
(State Storage)
*RCL {1|2|3|4|5}
*SAV {1|2|3|4|5}
MEMory:NSTates?
MEMory:STATe:CATalog?
MEMory:STATe:DELete {1|2|3|4|5}
MEMory:STATe:DELete:ALL
MEMory:STATe:NAME {1|2|3|4|5} [,<name>]
MEMory:STATe:NAME? {1|2|3|4|5}
MEMory:STATe:RECall:AUTO {OFF|0|ON|1}
MEMory:STATe:RECall:AUTO?
MEMory:STATe:RECall:SELect {1|2|3|4|5}
MEMory:STATe:RECall:SELect?
MEMory:STATe:VALid? {1|2|3|4|5}