IAI America IA-T-XD - Manual (Page 130)

17-5. Memory clear
Global variables are cleared to zero.
Select the F4 (MClr) key on the Ctl screen.
Mode flow:
Press the F2 (Gvar) key.
When clearing memory, press the F1 (Yes) key.
When not clearing memory, press the F2 (No) key.
The display returns to the previous screen.
Return to the previous screen with the ESC key.
17-6. Reconnection
The Teaching Pendant is reconnected to the controller. In a communicable state, the off-line
mode can be moved to the on-line mode.
Select the F1 (Cnct) key on the Ctl screen.
Mode flow:
When reconnecting, press the F1 (Yes) key.
When not reconnecting, press the F2 (No) key.
The display returns to the previous screen.
The message “Please wait…” flashes during
reconnection.
After completion of reconnection, the display returns
to the Mode Selection screen.
127