Teledyne LeCroy Merlin - Users Manual - Manual (Page 105)

97
Merlin Protocol Analyzer User’s Manual CATC SW Version 2.0
Linking Multiple Events to One Counter - When two or more Events are
strung together and then connected to a counter, the event button that is
touching the counter gets counted. The example below reads "Trigger after
you see a sequence of a packet with the specified payload followed by a 21
null packets."
Linking Two Events to Two or More Counters - If an Event is linked to
Count1 and a second event is linked to Count2, it creates an "or" statement.
This statement reads "Trigger when Count1 OR Count2 has reached their
specified values."
This example reads "Trigger when Count1 has counted 5 Poll packets or
Count2 has counted 10 errors."