6 specifications, Package, Power requirements – Teledyne LeCroy Merlin - Users Manual User Manual
Page 15: Environmental conditions, Switches, Leds, Recording memory size, Certification, Specifications
7
Merlin Protocol Analyzer User’s Manual
CATC
SW Version 2.0
1.6 Specifications
Package
Power Requirements
90-264VAC, 47-63Hz (universal input), 100W maximum
Environmental Conditions
Switches
LEDs
Recording Memory Size
128M x 8-bit DRAM for traffic data capture, timing, state and other data.
Certification
FCC (Class A), CE Mark
Dimensions:
9.2 x 8.4 x 2.5 inches
(23.4 x 21.3 x 6.4 cm)
Connectors:
AC power connection
external clock input (EXT CLK, BNC)
host connection (USB, type ‘B’)
data connector (Data In/Out, 9-pin DB)
Weight:
2.8 lbs. (1.2 kg)
Operating Range:
0 to 55 °C (32 to 131 °F)
Storage Range:
-20 to 80 °C (-4 to 176 °F)
Humidity:
10 to 90%, non-condensing
Power:
on/off
Manual Trigger:
when pressed forces a trigger event
Power (PWR):
illuminated when the analyzer is powered on.
Recording (REC):
illuminated when the analyzer is actively recording traffic
data.
Triggered (TRG):
illuminated during power-on testing, and when the analyzer
has detected a valid trigger condition.
Synchronized
(SYNC):
flashes during acquisition of the traffic hop sequence, illu-
minated when the analyzer is locked to the hop sequence.