Overview, 1 bluetooth™ overview, Chapter 1 overview – Teledyne LeCroy Merlin - Users Manual User Manual

Page 9: Bluetooth™ overview

Advertising
background image

1

Merlin Protocol Analyzer User’s Manual

CATC

SW Version 2.0

1. Overview

The CATC Merlin™ Protocol Analyzer is a member in CATC's
industry-leading line of high performance, Bluetooth protocol analyzers.
Merlin has been designed using the same modular software and hardware
architecture that made its predecessors highly successful in the serial bus
protocol analyzer market worldwide.

1.1 Bluetooth™ Overview

The Bluetooth™ wireless technology is set to revolutionize the personal
connectivity market by providing freedom from wired connections. It is a
specification for a small-form factor, low-cost radio solution providing links
between mobile computers, mobile phones and other portable handheld
devices, and connectivity to the internet.

The Bluetooth™ Special Interest Group (SIG), comprised of leaders in the
telecommunications, computing, and network industries, is driving
development of the technology and bringing it to market. The Bluetooth™
SIG includes promoter companies 3Com, Ericsson, IBM, Intel, Lucent,
Microsoft, Motorola, Nokia and Toshiba, and more than 2500 SIG
members.

Bluetooth™ is a radio technology specification designed to transmit both
voice and data wirelessly, providing an easier way for a variety of mobile
computing, communications and other devices to communicate with one
another without the need for cables. Bluetooth™ could make possible what
is being called the personal-area network by allowing users to transmit small
amounts of data at 1M bit/sec with a range of 10 to 100 meters, depending
the power of the radio, over the 2.4-GHz radio frequency. The key benefits
of the Bluetooth™ technology are robustness, low complexity, low power
and low cost. Bluetooth™ employs a rapid frequency hopping mechanism
to minimize the effects of ‘collisions’ with other protocols and devices
operating in the same frequency band. Mechanisms exist for a Bluetooth™
device to determine all devices in range as well as to request connection to
a piconet as either a master or a slave.

Please refer to the Bluetooth™ Specification, version 1.1 for details on the
protocol. The Bluetoothspecification is available from the Bluetooth
SIG at its web site http://www.bluetooth.org/

Advertising