Go to marker, Go to, Go to marker go to – Teledyne LeCroy Merlin - Users Manual User Manual
Page 142
134
Merlin Protocol Analyzer User’s Manual
CATC
SW Version 2.0
You see the Go to Packet/Message/Protocol window:
Step 2
Enter the number of the packet, message or protocol you want to
display.
Step 3
Click OK.
The Trace View repositions to show the packet at the top of your screen.
Go to Marker
To instruct the analyzer to display a marked packet,
Step 1
Select Go to Marker under Search on the Menu Bar.
You see a drop-down menu listing the marked packets in that Trace View:
Step 2
Select the desired packet from the displayed list.
The Trace View repositions to show the packet at the top of your screen.
Note
The Go to Marker feature functions in conjunction with the Set Marker feature.
The comments within the parentheses following each marked packet are added or
edited with the Set Marker feature.
Go to
The Go To feature takes you directly to an event in a Trace.
Step 1
Select Go To under Search on the Menu Bar.