Teledyne LeCroy Merlin - Users Manual - Manual (Page 13)

5
Merlin Protocol Analyzer User’s Manual CATC SW Version 2.0
To capture the data, the HCI Probe should be connected to the respective
'Host to Controller' and 'Controller to Host' lines. When the recording of the
IUT's HCI is enabled and the application starts a recording, the serial data is
captured as incoming serial data. For this, up to two COM ports should be
configured for each IUT.
1.5 Features
General
• Flexible design - reconfigurable hardware for future enhancements.
• User friendly - the Graphical User Interface software of Merlin Analyzer
is designed to be consistent with the ‘CATC Trace’ using color and
graphics to display Bluetooth™ traffic.
• Radio Level Point of Observation and Capture - traffic capture at the
Radio Level for comprehensive analysis.
• Complies with Bluetooth™ v1.1 specification.
• Supports point-to-point and point-to-multipoint Bluetooth™ piconets.
• Supports 79 frequency hop, reduced and fixed frequency.
• Automatic tracking of changes in the hopping scheme.
• Automatic tracking of whitened and non-whitened packets and traffic.
• Supports recording of serial HCI traffic from implementation under test
(IUT)
• Free non-recording, view-only software available.
• Power-on self-diagnostics.
• Internal 100V to 240 V AC power supply.
• Compliant with FCC class A requirements / meets all CE mark
requirements.
• One year warranty and hot-line customer support.
Physical Components
Note For an updated description of requirements for the host machine, please refer to
the readme file.
• Trace viewer software support for Microsoft Windows versions 98SE
and above.
• Recording memory of 128MB - enough to record 25 minutes of high
volume traffic.