5 edit or clear marker, Edit or clear marker – Teledyne LeCroy Merlin - Users Manual User Manual
Page 123
Advertising
115
Merlin Protocol Analyzer User’s Manual
CATC
SW Version 2.0
Step 2
Select Set Marker.
You see the Edit Marker Comment window where you can enter a
unique comment about this packet.:
Step 3
Enter your comment.
Step 4
Click OK.
A marked packet is indicated by a vertical red bar along the left edge of the
packet # block:
8.5 Edit or Clear Marker
To clear or edit the comments associated with a packet marker,
Step 1
Left-click on Packet # for the chosen packet.
Advertising