2 recording an existing piconet, Recording an existing piconet – Teledyne LeCroy Merlin - Users Manual User Manual
Page 60
Advertising
52
BTTracer Protocol Analyzer User’s Manual
CATC
SW Version 2.0
The wizard will close and your trace will display.
5.2 Recording an Existing Piconet
Using Recording Wizard to record an existing piconet is similar to recording
a new piconet. The main difference is that you will be asked if your Master
device can support multiple slave devices and whether it can respond to
pages once it has created a piconet with another device.
Step 1
To start the Recording Wizard, press
or select Setup >
Recording Wizard from the menu.
Advertising