Teledyne LeCroy Merlin - Users Manual - Manual (Page 67)

59
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.0
If you selected only the second option in Step 12 (=’Passive Sync &
Record’), the following screen will display.
This screen asks you for the address of the Page Target device -- which
in this case is Merlin. Since the devices in your piconet are not able to
respond to inquiries, Merlin will not be able to page the devices and join
the piconet. Instead, you will assign Merlin an address here in this
screen, then direct your piconet Master device to connect to Merlin. The
Master will attempt to connect to Merlin and therein give Merlin the
information it needs to record the Master and slave devices.
Step 13
Type in an address of your choosing for Merlin (= Page Target).
You are making up an address for Merlin that the Master will use to try
to connect to Merlin.