Teledyne LeCroy Merlin - Users Manual - Manual (Page 29)

21
Merlin Protocol Analyzer User’s Manual CATC SW Version 2.0
After a few moments, the recording will terminate and the results will display. The
screen should look like the sample recording below which shows the FHS packets
generated during the Inquiry process.
When the recording session is finished, the bus traffic is saved to the hard drive as
a file named data.tfb or whatever name you assign as the default filename. While
the file is being saved, you should see a brown progress bar at the bottom of the
screen. When the bar turns white, it indicates that the data has been saved to disk.
Step 6 To save a current recording for future reference, Select Save As
under File on the Menu Bar.
OR
Click on the Tool Bar.
You see the standard Save As screen.
Step 7
Give the recording a unique name and save it to the
appropriate directory.
2.8 External Interface Breakout Board
The External Interface Breakout Board is an accessory that allows standard,
LV TTL signals to be channeled into the analyzer for triggering or out of the
analyzer for use by an oscilloscope, logic analyzer or other device. Six
ground pins and one 5-volt pin are provided.