Other features, 1 search, Go to trigger – Teledyne LeCroy Merlin - Users Manual User Manual
Page 141: Go to packet/message/protocol, Chapter 10 other features, Search, Go to trigger go to packet/message/protocol
133
Merlin Protocol Analyzer User’s Manual
CATC
SW Version 2.0
10. Other Features
This chapter describes how to conduct searches and to create reports on
errors, bus utilization, and other features.
10.1 Search
The Search feature provides several options for searching through recorded
traffic, allowing you to find specific packets based on triggering status,
packet number, marking, or content.
To view the Search options,
•
Click Search in the Menu bar.
You see the Search drop-down menu:
Go to Trigger
To display a triggering event, select Go to Trigger under Search on the
Menu bar. The Trace Viewer display will reposition the trace to show the
triggering event at the top of the screen.
Go to Packet/Message/Protocol
To display a specific packet, Message or Protocol
Step 1
Select Go to Packet/Message/Protocol under Search on the
Menu Bar.