Teledyne LeCroy Merlin - Users Manual User Manual
Page 24
16
Merlin Protocol Analyzer User’s Manual
CATC
SW Version 2.0
HCITrace RS-232 Cable [b] to ‘Connector A’ in the 2-port
RS232 to USB converter [d].
Step 4
Connect the connector marked with ‘COM B’ in the
HCITrace RS-232 Cable [b] to ‘Connector B’ in the 2-port
RS232 to USB converter [d].
Step 5
Connect the USB cable to the USB connector of the 2-port
RS232 to USB converter [e].
Monitoring RS232 level Signals
Legend for photo:
[a] HCI Probe Cable
[b] HCI Trace RS-232 Cable
[c] Connectors A and B on the other end of the HCI Trace RS-232
Cable
[d] Two-Port RS-232 to USB Converter
For monitoring RS232 level signals do not use the converter. To assemble
the HCI probe for this configuration, perform the following steps:
Step 1
Connect the DB-9 connector of the HCITrace Probe Cable
[a] to the connector marked with ‘'RS-232/Probe’’ in the
HCITrace RS-232 Cable [b].
Step 2
Connect the connector marked with ‘COM A’ in the
HCITrace RS-232 Cable [c] to ‘Connector A’ in the 2-port