Teledyne LeCroy Merlin - Users Manual - Manual (Page 53)

45
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.0
within range, then press Next. The following screen will display.
You will see two options:
Step 4 In the text box, enter the length of time you want Merlin to search
for nearby devices.
The default value is 11. If you do not sure what time value to enter, use
the default value.
Step 5
Press Next.
Before the Inquiry, Merlin tests the hardware connection. In the case of
failure, the following screen will display.
Clicking OK will close the message box.