Teledyne LeCroy Merlin - Users Manual - Manual (Page 118)

110
BTTracer Protocol Analyzer User’s Manual CATC SW Version 2.0
Hiding Packets, Messages, and Protocols
The "Hide Packets and Transactions" box contains two grids of checkboxes
for hiding whole packets, messages, protocols, and traffic from individual
devices. The grids are labeled "Devices to Hide" and "Levels to Hide".
Devices to Hide
The "Devices to Hide" grid lets you hide
traffic according to device address. The
grid divides into columns which
represent different devices.
Columns labeled "0" through "7" and
"All" represent the Active Member Address of a device. By checking one
of the boxes in a column, you hide the traffic of the selected device (or
traffic from all devices if you have selected All.)
The row in which you place your checkmark determines whether you are
hiding traffic going to or from a device.
• Master - Hide traffic from a Master to selected Slaves
• Slave - Hide traffic from selected Slaves to the Master
• Both - Hide all traffic between the Master and selected Slave
Example: to hide all traffic from a Master to a Slave device with an address
of six, click the checkbox under column 6 on the row marked Master.
Levels to Hide
The "Levels to Hide" grid divides into rows which
represent the different packet, message, and protocol
levels. Clicking a checkbox will cause Merlin to hide all
traffic of a selected level.
Hiding Packets
At the bottom of the Hiding tab of the Display Options
window, check boxes are available for hiding HOPs,
POLLs, NULLs, and other kinds of traffic.