AT&T 585-350-812 - Manual (Page 68)

4-20
ASAI Administration
NOTE :
The domain must be disabled before it can be removed.
Initialize IPCI Board
The IPCI Board must be initialized when it is taken off-line. The Initialize IPCI
Board procedure downloads the driver software onto the card and puts the card
on-line. The IPCI card is now actively using the link.
!
WARNING :
The “Initialize IPCI Board” command should be used only as an error
recovery procedure for the card. You do not need to initialize the IPCI card
each time that you diagnose the card.
NOTE :
If the IPCI card is already initialized and on-line, the card must first be
taken off-line before it can be re-initialized.
The Initialize IPCI Board screen contains information on what occurred during ini-
tialization of the IPCI card. The Initialize IPCI Board screen displays information
as to whether the initialization was a success or failure and the reason for the fail-
ure. Figure 4-12 displays an example of the Initialize IPCI Board screen with IPCI
card initialization information displayed.
To initialize the IPCI card from the ASAI Administration screen, highlight “Initialize
IPCI Board”, then press
.
Figure 4-12. Initialize IPCI Board Screen
ENTER
Initialize IPCI Board
IPCI Board Initialization completed successfully.
Press ENTER to continue.
CHG-KEYS CANCEL PREVPAGE NEXTPAGE