Asai overview, Overview of the adjunct/switch, Ap plication interface feature 1-1 – AT&T 585-350-812 User Manual
Page 7
1-1
1
ASAI Overview
Overview of the Adjunct/Switch
Application Interface Feature
The AT&T Adjunct/Switch Application Interface (ASAI) is an optional package that
may be installed on top of the standard CONVERSANT Voice Information System
software. Instructions for installing the Adjunct/Switch Application Interface are
provided in Chapter 3, "ASAI Installation".
The AT&T Adjunct/Switch Application Interface provides an Integrated Services
Digital Network (ISDN)-based interface between AT&T PBX’s and adjunct proces-
sors.The VIS ASAI feature supports this application interface for communications
with the AT&T DEFINITY Communications System, Generic 3i (hereafter referred
to as DEFINITY Generic 3i).This digital signaling interface allows the VIS to moni-
tor and route calls on the DEFINITY Generic 3i switch. When used in conjunction
with standard Tip/Ring (T/R) or Line Side T1 (LST1) interfaces, the ASAI interface
allows the VIS to monitor and control calls delivered to a T/R or LST1 channel on
the VIS.
Access to ASAI capabilities is provided through the Script Builder application gen-
eration language. Access to ASAI capabilities at the Script Builder level mini-
mizes the effort required to implement ASAI-based applications. For example,
there is no need to receive, parse, and process individual, lower-level ASAI mes-
sages. Additional Script Builder actions give the script designer high-level access
to ASAI capabilities. These ASAI capabilities can be used to design the following
types of applications.
These types of applications are discussed later in this chapter.
■
ASAI Voice Response Applications
■
■