AT&T 585-350-812 - Manual (Page 75)

4-27
ASAI Administration
Take IPCI Board Off-line
The Take IPCI Board Off-Line procedure takes the IPCI card off-line and effec-
tively disables the link between the IPCI card and the driver software.If you sus-
pect that there might be problems with the ASAI communications and you would
like to reinitialize the IPCI card, you must take the card off-line by executing the
following command before you may execute the Initialize the IPCI card command.
!
WARNING :
Do not take the card off-line while the ASAI application is running. This
command should not be used in normal operation situations. It should be
used in conjunction with the “Initialize IPCI Board” command as an error
recovery procedure for the card.
From the ASAI Administration screen, highlight “Take IPCI Board Off-line”, then
press
to execute the IPCI card off-line procedure. Figure 4-16 shows an
example of the Take IPCI Board Off-Line screen when the card is successfully
taken off-line.
Figure 4-16. Take IPCI Board Off-line Screen
The Take IPCI Board Off-line screen contains information on whether the IPCI
card has been successfully taken off-line.
ENTER
Take IPCI Board Off-line
CHG-KEYS CANCEL
IPCI Board has been taken off-Line.
Press ENTER to continue.
PREVPAGE NEXTPAGE