AT&T 585-350-812 - Manual (Page 93)

6-11
ASAI Script Builder Actions
Table 6-4. A_Event Fields
Defining A_RouteSel
The A_RouteSel action is used to send an ASAI route message to the PBX. The
A_RouteSel action is used in conjunction with the A_Event action and may be
used to construct scripts assigned to RTE type domains. Note that the
A_RouteSel action should not be used in scripts assigned to Control (CTL), Auto-
matic Call Distribution (ACD), and Vector Directory Number (VDN) type domains
and may not be used in voice scripts.
To add A_RouteSel to a transaction while defining an application in Script Builder,
press ADD. The Action Choices screen opens. Highlight “A_RouteSel,” then
press .
Press CANCEL to exit from the Action Choices screen.
You must now define the A_RouteSel step further. In the Define Transaction
screen, highlight “External Action: A_RouteSel,” then press DEFINE. The Define
A_RouteSel screen opens.
Field Input/Output Required? Field Type Field Size
Connected Number output required char 20
Calling Party Number output required char 20
Called Party Number output required char 20
Switch Data output required char 16
Trunk Group Id output required num –
Call Id output required num –
Other Call Id output required num –
LAI Display Info ouput required char 15
VIS Data output required char 20
Routing Id output reuired num –
Cause Value output required num –
Return Field ouput optional num –
ENTER