Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual

Page 123

Advertising
background image

Brocade FastIron SX, FCX, and ICX Diagnostic Reference

111

53-1003076-02

IPv6 OSPF debug commands

5

Debug: Jan 1 20:14:33 OSPFv3: LS 9 4b78 4040408 ACKed by Neighbor 10.2.2.2 is not

in retranslist

Debug: Jan 1 20:14:33 OSPFv3: LS 9 0 4040408 ACKed by Neighbor 10.2.2.2 is not in

retranslist

Debug: Jan 1 20:14:33 OSPFv3: Snd LSAck on ve 9 OSPFv3:

(fe80::224:38ff:fe21:6400->OSPFv3: ff02::5)

Type:0008, LSID:2052 Adv:10.2.2.2 SEQ:80000001 AGE:45

Type:4005, LSID:271 Adv:10.2.2.2 SEQ:80000001 AGE:45

Type:4005, LSID:272 Adv:10.2.2.2 SEQ:80000001 AGE:45

Type:4005, LSID:273 Adv:10.2.2.2 SEQ:80000001 AGE:45

Type:4005, LSID:274 Adv:10.2.2.2 SEQ:80000001 AGE:45

Type:4005, LSID:275 Adv:10.2.2.2 SEQ:80000001 AGE:45

Type:4005, LSID:276 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:277 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:278 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:279 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:280 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:281 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:282 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:283 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:284 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:285 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:286 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:287 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:4005, LSID:288 Adv:10.2.2.2 SEQ:80000001 AGE:44

Type:2001, LSID:0 Adv:10.2.2.2 SEQ:8000003c AGE:1

Type:2009, LSID:0 Adv:10.2.2.2 SEQ:80000001 AGE:3600

Debug: Jan 1 20:14:33 OSPFv3: Snd LSAck on ve 9 OSPFv3:

(fe80::224:38ff:fe21:6400->OSPFv3: fe80::224:38ff:fed6:7800)

Type:4005, LSID:272 Adv:10.2.2.2 SEQ:80000001 AGE:3600

Debug: Jan 1 20:14:33 OSPFv3: Snd LSAck on ve 9 OSPFv3:

(fe80::224:38ff:fe21:6400->OSPFv3: fe80::224:38ff:fed6:7800)

Type:4005, LSID:273 Adv:10.2.2.2 SEQ:80000001 AGE:3600

Debug: Jan 1 20:14:33 OSPFv3: Snd LSAck on ve 9 OSPFv3:

(fe80::224:38ff:fe21:6400->OSPFv3: ff02::5)

Type:4005, LSID:272 Adv:10.2.2.2 SEQ:80000001 AGE:3600

Type:4005, LSID:273 Adv:10.2.2.2 SEQ:80000001 AGE:3600

debug ipv6 ospf packet-lsa-req

Syntax: [no] debug ipv6 ospf packet-lsa-req

This command displays all OSPFv3 LSA request packets in rx or tx mode as shown in the following
example.

Brocade# debug ipv6 ospf packet-lsa-req

OSPFv3: packet-lsa-req debugging is on

Brocade(config-if-e1000-8/9)# Debug: Jan 1 19:12:00 OSPFv3: Rcv LSReq on ve 9

OSPFv3: (fe80::224:38ff:fed6:7800->OSPFv3: fe80::224:38ff:fe21:6400)

Type:2001, LSID:0 Adv-Router:10.4.4.8

Type:2009, LSID:0 Adv-Router:10.4.4.8

Type:4005, LSID:26 Adv-Router:10.4.4.8

Type:4005, LSID:27 Adv-Router:10.4.4.8

Type:4005, LSID:28 Adv-Router:10.4.4.8

Type:4005, LSID:29 Adv-Router:10.4.4.8

Type:4005, LSID:30 Adv-Router:10.4.4.8

Type:0008, LSID:644 Adv-Router:10.4.4.8

Debug: Jan 1 19:12:00 OSPFv3: Snd LSReq on ve 9 OSPFv3:

(fe80::224:38ff:fe21:6400->OSPFv3: fe80::224:38ff:fed6:7800)

Type:2009, LSID:19320 Adv-Router:10.4.4.8

Advertising