Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 37)

Brocade FastIron SX, FCX, and ICX Diagnostic Reference 25
53-1003076-02
GVRP debug commands
3
"DHCPC: received DHCPNAK packet in renewal-state on port port-id"
"DHCPC: changing port port-id state from RENEWING to INIT-SELECTING"
"DHCPC: received DHCPACK packet in rebind-state on port port-id"
"DHCPC: received non matching 'xid'(0x%X) in REBIND message"
"DHCPC: changing port port-id state from REBINDING to BOUND"
"DHCPC: received non matching 'xid'(0x%X) in DHCPNAK message"
"DHCPC: received DHCPNAK packet in renewal-state on port port-id"
"DHCPC: changing port port-id state from REBIND to INIT-SELECTING"
"DHCPC: sending packet port port-id"
"DHCPC: send completion called on port: port-id"
"DHCPC: Freeing packet"
"DHCPC: unable to get some-number option from dhcp message from port port-id"
"DHCPC: received server id address opton: ip-address from port port-id"
"DHCPC: received lease-time option: some-number from port port-id"
"DHCPC: received domain-name option: %s from port port-id"
"DHCPC: received dns-server address option: ip-address from port port-id"
"DHCPC: received default-router address option: ip-address from port port-id"
"DHCPC: received TFTP server name option: %s from port port-id"
"DHCPC: received TFTP server address opton: ip-address from port port-id"
"DHCPC: received Bootfile name option: %s from port port-id"
"DHCPC: received 'hostname' option: %s from port port-id"
"DHCPC: received maximum message size option: some-number from port port-id"
"DHCPC: lease timer events called with invalid port"
"DHCPC: changing port port-id state from BOUND to REBINDING"
"DHCPC: changing port port-id state from BOUND to RENEWING"
"DHCPC: deleting existing ip address configuration on port port-id"
"DHCPC: changing port port-id state from REQUESTING to INIT-SELECTING"
"DHCPC: failed to renew ip address with dhcp server; continuing with lease period"
"DHCPC: changing port port-id state from REBINDING to INIT_SELECTING"
"DHCPC: changing port port-id state from REBINDING to REQUESTING"
GVRP debug commands
The GARP VLAN Registration Protocol (GVRP) debugging can be enabled by using the debug gvrp
command.
debug gvrp packets
Syntax: [no] debug gvrp packets
This command enables the debugging of GVRP packets.
Brocade# debug gvrp packets
GVRP: Packets debugging is on
GVRP: 0x2095ced4: 01 80 c2 00 00 21 00 e0 52 ab 87 40 00 3a 42 42
GVRP: 0x2095cee4: 03 00 01 01 02 00 04 05 00 02 04 05 00 07 04 05
GVRP: 0x2095cef4: 00 09 04 05 00 0b 04 02 03 e9 04 01 03 eb 04 01
GVRP: 0x2095cf04: 03 ec 04 01 03 ef 04 01 03 f1 04 01 05 dd 04 01
GVRP: 0x2095cf14: 09 cb 04 01 0f a1 00 00
GVRP: Port 2/1 RCV
GVRP: 0x2095ced4: 01 80 c2 00 00 21 00 e0 52 ab 87 40 00 28 42 42
GVRP: 0x2095cee4: 03 00 01 01 04 02 03 e9 04 01 03 eb 04 01 03 ec
GVRP: 0x2095cef4: 04 01 03 ef 04 01 03 f1 04 01 05 dd 04 01 09 cb
GVRP: 0x2095cf04: 04 01 0f a1 00 00
GVRP: Port 2/1 TX
GVRP: 0x207651b8: 01 80 c2 00 00 21 00 04 80 2c 0e 20 00 3a 42 42
GVRP: 0x207651c8: 03 00 01 01 02 00 04 05 03 e9 04 05 03 eb 04 05
GVRP: 0x207651d8: 03 ec 04 05 03 ef 04 05 03 f1 04 05 05 dd 04 05