Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 185)

Brocade FastIron SX, FCX, and ICX Diagnostic Reference 173
53-1003076-02
sFlow debug commands
7
Tracing the outgoing Radius Authentication packet..
UDP packet source IP=198.19.9.1, port=1645, destination IP=64.12.12.5, port=1745
Radius Header (hex): Code=0x01 Identifier=0x11 Length=0x0065
Authenticator (hex):000078d6000028c00000699d00004bf3
Attribute Type(hex)=0x01 Len(hex)=0x0e Value (ASCII)=0 0 3 0 4 8 7 4 3 1 8 1
Attribute Type(hex)=0x02 Len(hex)=0x12 Value (hex)=414084e32550daec45ef8129b7c6
aed9
Attribute Type(hex)=0x06 Len(hex)=0x06 Value (hex)=00000002
Attribute Type(hex)=0x0c Len(hex)=0x06 Value (hex)=000005dc
Attribute Type(hex)=0x04 Len(hex)=0x06 Value (hex)=c6130901
Attribute Type(hex)=0x3d Len(hex)=0x06 Value (hex)=0000000f
Attribute Type(hex)=0x05 Len(hex)=0x06 Value (hex)=0000038c
Attribute Type(hex)=0x1f Len(hex)=0x13 Value (ASCII)=0 0 - 3 0 - 4 8 - 7 4 - 3
1 - 8 1
Radius message received from server.
Tracing the received Radius packet..
Radius Header (hex): Code=0x02 Identifier=0x11 Length=0x0051
Authenticator (hex):c98e259aa7b6aeb66baf79af9a77e81e
Attribute Type(hex)=0x41 Len(hex)=0x06 Value (hex)=00000006
Attribute Type(hex)=0x51 Len(hex)=0x05 Value (hex)=313939
Attribute Type(hex)=0x40 Len(hex)=0x06 Value (hex)=0000000d
Attribute Type(hex)=0x07 Len(hex)=0x06 Value (hex)=00000001
Attribute Type(hex)=0x06 Len(hex)=0x06 Value (hex)=00000002
Attribute Type(hex)=0x19 Len(hex)=0x20 Value (hex)=3cdc04f60000013700010a144086
01cb1fa09e8d214e00000000000001b2
RADIUS: Unsupported RADIUS message 7 with code 2
RADIUS: Unsupported RADIUS message 6 with code 2
RADIUS: Unsupported RADIUS message 25 with code 2
+++++ Timer cancelled for client 15.
Radius server returns status PASS.
AAA:DYNAMIC-AUTHEN:Authentication successful.
SYSLOG: <13>0d00h25m33s:SDX1600 MAC Authentication succeeded for [0000.0074.3181
198.19.9.105] on port 15/12
RADIUS: Reset client 15, Total number of active clients=0
Reseting RADIUS Client structure
sFlow debug commands
sFlow is a system for observing traffic flow patterns and quantities within and among a set of
Brocade devices. The following command displays debug information related to sFlow.
debug sflow problems
Syntax: [no] debug sflow problems
This command enables debuggging of the internal sFlow.
Brocade# debug sflow problems
sflow: problem debugging is on