Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 51)

Brocade FastIron SX, FCX, and ICX Diagnostic Reference 39
53-1003076-02
MCT show commands
3
Name Rbridge-id Config Port Trunk FSM-State
A-satya-000000147d80 3318 Deployed 4/17 3 Admin Up
A-satya-000000c74d40 2668 Deployed 3/13 2 Up
show cluster ccp client
Syntax: show cluster cluster_name | cluster_id ccp client client_ID
• cluster_name—Specifies the cluster name.
• cluster_id—Specifies the cluster port number.
• client_ID—Specifies the client port ID.
This command displays the registered CCP clients such as cluster manager, MDUP, or STP.
The following output is displayed when the show cluster command is configured with the cluster ID.
Brocade# show cluster 3000 ccp client
Client Node Info:
-----------------
Name: cluster_mgr ID: 1 Cluster ID: 3000 Number of Peers: 1
Peer Node Info:
Peer IP: 10.1.1.2 Registered Events: All Events
Client Node Info:
-----------------
Name: mdup ID: 2 Cluster ID: 3000 Number of Peers: 1
Peer Node Info:
Peer IP: All Peers
Registered Events: PACKET_RECEIVED
Client Node Info:
-----------------
Name: stp ID: 4 Cluster ID: 3000 Number of Peers: 1
Peer Node Info:
Peer IP: All Peers
Registered Events: All Events
Client Node Info:
-----------------
Name: mcast ID: 8 Cluster ID: 3000 Number of Peers: 1
Peer Node Info:
Peer IP: All Peers
Registered Events: All Events
Client Node Info:
-----------------
Name: vrrp ID: 16 Cluster ID: 3000 Number of Peers: 1
Peer Node Info:
Peer IP: All Peers
Registered Events: All Events
The following output is displayed when the show cluster command is configured with the cluster
name.
Brocade# show cluster SX ccp client
Client Node Info:
-----------------
Name: cluster_mgr ID: 1 Cluster ID: 3000 Number of Peers: 1
Peer Node Info:
Peer IP: 10.1.1.2 Registered Events: All Events
Client Node Info:
-----------------
Name: mdup ID: 2 Cluster ID: 3000 Number of Peers: 1
Peer Node Info: