Brocade FastIron SX, FCX, and ICX Diagnostic Reference User Manual
Page 213
Brocade FastIron SX, FCX, and ICX Diagnostic Reference
201
53-1003076-02
show tech-support cluster
9
Client Info:
------------
Number of Clients configured: 2
Name Rbridge-id Config LACP Port Trunk FSM-State
client-1 100 Deployed no 7/7 2 Up
client-2 200 Deployed no 7/9 3 Up
**************Peer Session Details*********************
IP address of the peer 10.20.152.21
Rbridge ID of the peer 2
Session state of the peer OPERATIONAL
Next message ID to be send 2426
Keep Alive interval in seconds 10
Hold Time Out in seconds 90
Fast Failover is enable for the session
UP Time 0 days: 6 hr:43 min:53 sec
Number of tcp packet allocations failed 0
Message Init Keepalive Notify Application Badmessages
Send 1 2425 0 52 0
Receive 1 2425 0 41 0
TCP connection is up
TCP connection is initiated by 10.20.152.50
TCP connection tcbHandle not pending
TCP connection packets received
**************TCP Connection Details*********************
TCP Connection state: ESTABLISHED Maximum segment size: 1436
Local host: 10.20.152.50, Local Port: 12019
Remote host: 10.20.152.21, Remote Port: 4175
ISentSeq: 3510235 SendNext: 3568780 TotUnAck: 0
TotSent: 58545 ReTrans: 0 UnAckSeq: 3568780
IRcvSeq: 2020934 RcvNext: 2075601 SendWnd: 16384
TotalRcv: 54667 DupliRcv: 0 RcvWnd: 16384
SendQue: 0 RcvQue: 0 CngstWnd: 3051
History
Related
Commands
Release
Command History
Release 08.0.00a
The show tech-support command was enhanced
to display MCT cluster configuration information.