Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 40)

28 Brocade FastIron SX, FCX, and ICX Diagnostic Reference
53-1003076-02
MCT debug commands
3
rstp_txRSTP(T=25524)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25525, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25544)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25544)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25545, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25564)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25564)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25565, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25584)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25584)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25585, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25604)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25604)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25605, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25624)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25624)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25625, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25644)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25644)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25645, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25664)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25664)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25665, VLAN=20,port=1/7)
port-stp-state=FORWARDING
rstp_txRSTP(T=25684)(vlan=20,port=1/15) Tx on CCEP, MCT peer is superior
rstp_txRSTP(T=25684)(vlan=20,port=1/15) Tx on CCEP while MCT peer is superior and
UP, abandom&
rstputil_mct_handle_incoming_BPDU(T=25685, VLAN=20,port=1/7)
port-stp-state=FORWARDING
Brocade# CCP_PKT(T=25694): Receiving Packet from peer 10.1.1.2
CCP_PKT(T=25694): Packet Info:0100000c000000080003000400000057
CCP_PKT(T=25694): Receiving Packet from peer 10.1.1.2, appId=0
(CCP_APPLICATION_CCP=0;CCP_APPLICATION_CLUSTER_MGR=1)
CCP_PKT(T=25694): Packet Info:0100000c000000080003000400000057
CCP_PKT(T=25694):Processing ccp packet
CCP_PKT(T=25694): Packet Info:0003000400000057
CCP_PKT(T=25694): Handling received keep alive message
CCP_PKT(T=25694): Packet Info:0003000400000057
CLUSTER CCP_FSM(T=25694): Fsm7 got keepalive from 10.1.1.2
CLUSTER CCP:free data buf allocated packet count 1 buffer 2291f5be
CLUSTER CCP:internal free data buf allocated packet count 0 bufer 2291f5be
CLUSTER CCP:internal alloc data buf allocated packet count 1 buffer 2291f5be
CLUSTER CCP:alloc data buf allocated packet count 1 buffer 2291f5be