Brocade FastIron SX, FCX, and ICX Diagnostic Reference - Manual (Page 71)

Brocade FastIron SX, FCX, and ICX Diagnostic Reference 59
53-1003076-02
BGP debug commands
4
BGP: 10.1.1.2 Decay 10.1.1.32/32, ostate <d>, oPnlty=6805, nPnlty=840, time=2712
BGP: 10.1.1.2 reuse_list_index=258, curr_offset=45
BGP: 10.1.1.2 10.1.1.32/32 not ready, state <d>, reuse_threshold=750,
new_index=61, offset=45
BGP: 10.1.1.2 Decay 10.1.1.32/32, ostate <d>, oPnlty=6805, nPnlty=840, time=2712
BGP: 10.1.1.2 reuse_list_index=258, curr_offset=45
BGP: 10.1.1.2 10.1.1.32/32 not ready, state <d>, reuse_threshold=750,
new_index=61, offset=45
BGP: 10.1.1.2 Decay 10.1.1.32/32, ostate <d>, oPnlty=6805, nPnlty=840, time=2712
BGP: 10.1.1.2 reuse_list_index=258, curr_offset=45
BGP: 10.1.1.2 10.1.1.32/32 not ready, state <d>, reuse_threshold=750,
new_index=61, offset=45
BGP: 10.1.1.2 Decay 10.1.1.32/32, ostate <d>, oPnlty=6805, nPnlty=840, time=2712
BGP: 10.1.1.2 reuse_list_index=258, curr_offset=45
BGP: 10.1.1.2 10.1.1.32/32 not ready, state <d>, reuse_threshold=750,
new_index=61, offset=45
debug ip bgp events
Syntax: [no] debug ip bgp events
This command generates information about BGP events, such as connection attempts and
keepalive timer activity.
Brocade# debug ip bgp events
BGP: events debugging is on
Brocade# BGP: 10.1.34.10 rcv notification: CEASE Message
BGP: 10.1.34.10 Peer went to IDLE state (Rcv Notification)
BGP: 10.1.35.10 rcv notification: CEASE Message
BGP: 10.1.35.10 Peer went to IDLE state (Rcv Notification)
BGP: 10.1.34.10 sending Graceful Restart cap, rbit 0, fbit 0, time 120, length 6
BGP: 10.1.35.10 sending Graceful Restart cap, rbit 0, fbit 0, time 120, length 6
BGP: 10.1.34.10 rcv GR capability afi/safi=1/1 fbit 0
BGP: 10.1.34.10 Peer went to ESTABLISHED state
BGP: 10.1.35.10 rcv GR capability afi/safi=1/1 fbit 0
BGP: 10.1.35.10 Peer went to ESTABLISHED state
BGP: 10.1.34.10 rcv UPDATE EOR (0), waiting EOR 0
BGP: 10.1.35.10 rcv UPDATE EOR (0), waiting EOR 0
BGP: 10.1.34.10 sending EOR (safi 0)...
BGP: 10.1.35.10 sending EOR (safi 0)...
debug ip bgp graceful-restart
Syntax: [no] debug ip bgp graceful-restart
Enable this command to receive information about BGP graceful restarts. The graceful restart
feature minimizes disruptions in forwarding and route flapping when a router restarts.
Brocade# debug ip bgp graceful-restart
BGP: graceful-restart debugging is on
BGP: 10.1.251.6 save graceful restart parameters, #RIB_out 2 (safi 0)
10.1.251.6 RIB_out peer reset #RIB_out 2 (safi 0)
BGP: 10.1.251.6 sending Graceful Restart cap, rbit 0, fbit 0, time 120, length 6
BGP: 10.1.251.6 sending Graceful Restart cap, rbit 0, fbit 0, time 120, length 6
BGP: 10.1.251.6 sending Graceful Restart cap, rbit 0, fbit 0, time 120, length 6
BGP: 10.1.251.6 rcv GR capability afi/safi=1/1 fbit 1
BGP: 10.1.251.6 sending EOR (safi 0)...