Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1208)

1200 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
23
rx-window-size <1-15>
Parameters
rx-window-size <1-15>
Example
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#rx-window-size 9
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#show context
l2tpv3 policy L2TPV3Policy1
hello-interval 200
retry-attempts 10
retry-interval 30
cookie-size 8
rx-window-size 9
reconnect-interval 100
reconnect-attempts 8
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#
Related Commands:
tx-window-size
l2tpv3-policy-commands
Configures the number of signalling packets transmitted without receiving an acknowledgment
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
tx-window-size <1-15>
Parameters
tx-window-size <1-15>
Example
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#tx-window-size 9
rfs7000-37FABE(config-l2tpv3-policy-L2TPV3Policy1)#show context
rx-window-size
<1-15> Configures the number of packets received without sending an acknowledgment. Specify a value from 1
- 15 (default is 10 packets).
no Resets the number of packets received without sending an acknowledgment to default (10 packets)
tx-window-size
<1-15> Configures the number of packets transmitted without receiving an acknowledgment. Specify a value
from 1 - 15 (default is 10 packets).