Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 435)

420 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
5
+-include-factory [show (running-config|session-config)
(|include-factory)]
+-interface [show running-config interface (|`WORD|ge <1-4>|me1|pc
<1-4>|vlan <1-4094>') (|include-factory)]
+-WORD [show running-config interface (|`WORD|ge <1-4>|me1|pc <1-4>|vlan
<1-4094>') (|include-factory)]
+-include-factory [show running-config interface (|`WORD|ge
<1-4>|me1|pc <1-4>|vlan <1-4094>') (|include-factory)]
+-ge
+-<1-4> [show running-config interface (|`WORD|ge <1-4>|me1|pc
<1-4>|vlan <1-4094>') (|include-factory)]
+-include-factory [show running-config interface (|`WORD|ge
<1-4>|me1|pc <1-4>|vlan <1-4094>') (|includefactory)]
--More--
rfs7000-37FABE>
rfs7000-37FABE#service signal kill testp
Sending a kill signal to testp
rfs7000-37FABE#
rfs7000-37FABE#service signal abort testprocess
Sending an abort signal to testprocess
rfs7000-37FABE#
rfs7000-37FABE#service pm stop on rfs7000-37FABE
rfs7000-37FABE#
rfs7000-37FABE(config)#service show cli
Global Config mode:
+-help [help]
+-search
+-WORD [help search WORD (|detailed|only-show|skip-show)]
+-detailed [help search WORD (|detailed|only-show|skip-show)]
+-only-show [help search WORD (|detailed|only-show|skip-show)]
+-skip-show [help search WORD (|detailed|only-show|skip-show)]
+-show
+-commands [show commands]
+-eval
+-LINE [show eval LINE]
+-debugging [show debugging (|(on DEVICE-OR-DOMAIN-NAME))]
+-cfgd [show debugging cfgd]
+-on
+-DEVICE-OR-DOMAIN-NAME [show debugging (|(on DEVICE-OR-DOMAIN-NAME))]
+-wireless [show debugging wireless (|(on DEVICE-OR-DOMAIN-NAME))]
+-on
+-DEVICE-OR-DOMAIN-NAME [show debugging wireless (|(on
DEVICE-OR-DOMAIN-NAME))]
+-voice [show debugging voice (|(on DEVICE-OR-DOMAIN-NAME))]
+-on
+-DEVICE-OR-DOMAIN-NAME [show debugging voice (|(on
DEVICE-OR-DOMAIN-NAME))]
--More--
rfs7000-37FABE(config)#
rfs4000-229D58>service show command-history on rfs4000-229D58
Configured size of command history is 200
Date & Time User Location Command
=====================================================================