Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 646)

Brocade Mobility RFS Controller CLI Reference Guide 633
53-1003098-01
7
device-upgrade auto
{(ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|
br81xx|ap82xx|rfs4000|rfs6000|rfs7000)}
device-upgrade count <1-20>
device-upgrade persist-images
Example
rfs4000-229D58(config-profile-default-rfs4000)#device-upgrade auto br71xx
rfs4000-229D58(config-profile-default-rfs4000)#
rfs4000-229D58config-profile-default-rfs4000)#show context
profile rfs4000 default-rfs4000
autoinstall configuration
autoinstall firmware
device-upgrade auto br71xx
device-upgrade persist-br-image
crypto ikev1 policy ikev1-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ikev2 policy ikev2-default
isakmp-proposal default encryption aes-256 group 2 hash sha
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
crypto ikev1 remote-vpn
crypto ikev2 remote-vpn
crypto auto-ipsec-secure
interface radio1
interface radio2
device-upgrade auto Enables automatic firmware upgrade on specified device types. When used along with the
add-auto command, the auto command allows access points, wireless controllers, and service platforms to
automatically upgrade firmware on adopted devices matching the specified device types.
{(ap621|ap622|br650|
br6511|ap6521|br1220|a
p6532|ap6562|br71xx|
br81xx|ap82xx|rfs4000|
rfs6000|rfs7000)} Selects the device types for automatic firmware upgrade
•
Brocade Mobility 650 Access Point – Optional. Enables automatic Brocade Mobility 650 Access Point
firmware image upgrade
•
Brocade Mobility 6511 Access Point – Optional. Enables automatic Brocade Mobility 6511 Access
Point firmware image upgrade
•
Brocade Mobility 1220 Access Point – Optional. Enables automatic Brocade Mobility 1220 Access
Point firmware image upgrade
•
Brocade Mobility 71XX Access Point – Optional. Enables automatic Brocade Mobility 71XX Access
Point firmware image upgrade
•
Brocade Mobility 1240 Access Point – Optional. Enables automatic Brocade Mobility 1240 Access
Point firmware image upgrade
•
Brocade Mobility RFS4000 – Optional. Enables automatic Brocade Mobility RFS4000 firmware image
upgrade
•
Brocade Mobility RFS6000 – Optional. Enables automatic Brocade Mobility RFS6000 firmware image
upgrade
•
Brocade Mobility RFS7000 – Optional. Enables automatic Brocade Mobility RFS7000 firmware image
upgrade
Multiple device types can be added to the auto list
device-upgrade
count <1-20> Configures the maximum number of concurrent upgrades possible
•
<1-20> – specify a value from 1 - 20.
device-upgrade Configures parameters for automatic firmware upgrade of adopted devices. Use this command to select
the device types and the maximum number of concurrent upgrades.
images Enables RF Domain manager to retain AP firmware image after upgrade, subject to availability of space
By default this feature is enabled for wireless controllers and disabled for access points.