Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 276)

260 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
help Description of the interactive help system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or terminal
rfs7000-37FABE(config-nac-list-test)#
Related Commands:
nac-list-mode commands
nac-list
The following table summarizes NAC list configuration mode commands.
exclude
nac-list-mode commands
Specifies the MAC addresses excluded from the NAC enforcement list
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
exclude <START-MAC> [<END-MAC> precedence <1-1000>|precedence <1-1000>]
no Removes a NAC list
Command Description Reference
exclude Specifies the MAC addresses excluded from the NAC enforcement list page 260
include Specifies the MAC addresses included in the NAC enforcement list page 261
no Cancels an exclude or include NAC list rule page 262
clrscr Clears the display screen page 385
commit Commits (saves) changes made in the current session page 386
end Ends and exits the current mode and moves to the PRIV EXEC mode page 234
exit Ends the current mode and moves to the previous mode page 387
help Displays the interactive help system page 387
revert Reverts changes to their last saved configuration page 394
service Invokes service commands to troubleshoot or debug
(config-if)
instance
configurations
page 394
show Displays running system information page 429
write Writes information to memory or terminal page 425