Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 644)

Brocade Mobility RFS Controller CLI Reference Guide 631
53-1003098-01
7
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)#
no
crypto-remote-vpn-client commands
Removes the remote VPN client settings
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
no [peer <1-3>|shutdown|transform-set]
Parameters
no [peer <1-3>|shutdown|transform-set]
Example
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)#)#show context
crypto remote-vpn-client
peer 1 ikev2 peer5
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)#
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)##no peer 1
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)#
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)#show context
crypto remote-vpn-client
rfs4000-229D58(config-profile-testBrocade Mobility
RFS4000-crypto-ikev2-remote-vpn-client)#
device-upgrade
Profile Config Commands
Configures device firmware upgrade settings on this profile. Access points, wireless controllers, and
service platforms using this profile automatically upgrade firmware on adopted devices.
Supported in the following platforms:
no peer <1-3> Removes the remote IKEv2 peer with the specified priority
no shutdown Enables remote VPN client
transform-set Disassociates the transform set attached with this remote VPN client