Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 877)

Brocade Mobility RFS Controller CLI Reference Guide 865
53-1003098-01
9
redirect
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
controller [<CONTROLLER-IP>|<CONTROLLER-HOSTNAME>] any
redirect
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
controller [<CONTROLLER-IP>|<CONTROLLER-HOSTNAME>] [cdp-match
<LOCATION-SUBSTRING>|
dhcp-option <DHCP-OPTION>|fqdn <FQDN>|ip [<START-IP>
<END-IP>|<IP/MASK>]|
lldp-match <LLDP-STRING>|mac <START-MAC> {<END-MAC>}|model-number
<MODEL-NUMBER>|
serial-number <SERIAL-NUMBER>|vlan <VLAN-ID>]
Parameters
redirect [ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|
ap82xx|rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-10000>
controller [<CONTROLLER-IP>|<CONTROLLER-HOSTNAME>] any
deny
[ap621|ap622|br650|br6511|ap6521|br1220|ap6532|ap6562|br71xx|br81xx|ap82xx|
rfs4000|rfs6000|rfs7000|nx45xx|nx65xx|nx9000] precedence <1-1000> controller
[<CONTROLLER-IP>|<CONTROLLER-HOSTNAME>] [cdp-match
<LOCATION-SUBSTRING>|dhcp-option <DHCP-OPTION>|fqdn <FQDN>|ip [<START-IP>
redirect Adds a redirect adoption rule. The rule applies to the device type selected. Specify the device type and
assign a precedence to the rule.
The different device types are:
•
Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point, Brocade
Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade Mobility 1240 Access Point
•
Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000
•
Service Platforms — Brocade Mobility RFS9510
An adoptee controller, such as Brocade Mobility RFS4000, Brocade Mobility RFS6000, and Brocade
Mobility RFS7000, can be redirected to another controller (configured to adopt controllers) with a capacity
equal to or higher than its own. For more information, see
controller .
precedence
<1-10000> Sets the rule precedence. Rules with lower values get precedence over rules with higher values.
controller
[<CONTROLLER-IP>|
<CONTROLLER-HOSTNAME>
] Configures the controller to which the adopting devices are redirected. Specify the controller’s IP address
or hostname.
•
<CONTROLLER-IP> – Specifies the controller’s IP address
•
<CONTROLLER-HOSTNAME> – Specifies the controller’s hostname
any Indicates any device. Any device seeking adoption is redirected.