Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 183)

Brocade Mobility RFS Controller CLI Reference Guide 167
53-1003098-01
4
alias vlan <VLAN-ALIAS-NAME> <1-4094>
Example
rfs4000-229D58(config)#alias address-range $TestAddRanAlias 192.168.13.10 to
192.168.13.13
rfs4000-229D58(config)#
rfs4000-229D58(config)#alias network $TestNetworkAlias 192.168.13.0/24
rfs4000-229D58(config)#
rfs4000-229D58(config)#alias host $TestHostAlias 192.168.13.10
rfs4000-229D58(config)#
rfs4000-229D58(config)#alias vlan $TestVLANAlias 1
rfs4000-229D58(config)#
rfs4000-229D58(config)#alias network-group $TestNetGrpAlias address-range
192.168.13.7 to 192.168.13.16 192.168.13.20 to 192.168.13.25
rfs4000-229D58(config)#commit
rfs4000-229D58(config)#alias network-group $TestNetGrpAlias network
192.168.13.0/24 192.168.16.0/24
rfs4000-229D58(config)#commit
rfs4000-229D58(config)#alias network-service $NetworkServAlias proto 17
rfs4000-229D58(config)#commit
rfs4000-229D58(config)#show context
!
! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-053B
!
!
version 2.3
!
!
alias network-group $TestNetGrpAlias network 192.168.13.0/24 192.168.16.0/24
alias network-group $TestNetGrpAlias address-range 192.168.13.7 to
192.168.13.16 192.168.13.20 to 192.168.13.25
!
alias network $TestNetworkAlias 192.168.13.0/24
!
alias host $TestHostAlias 192.168.13.10
!
alias address-range $TestAddRanAlias 192.168.13.10 to 192.168.13.13
!
alias network-service $NetworkServAlias proto udp
!
alias vlan $TestVLANAlias 1
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP
traffic"
--More--
alias vlan
<VLAN-ALIAS-NAME> Creates a VLAN alias identified by the <VLAN-ALIAS-NAME> keyword
•
<VLAN-ALIAS-NAME> – Specify the VLAN alias name.
Alias name should begin with ‘$’.
<1-4094> Maps the VLAN alias to a VLAN ID
•
<1-4094> – Specify the VLAN ID from 1 - 4094.